Welcome. Register now to see your pricing.
Close
124 Stainless Steel Vertical Down Electrode All Position Tensile 82000 Polarity Dcep/Ac Elongation 40% (1 Pack)
Stain-Plus Easy-Down is the first maintenance all-position stainless electrodespecifically formulated to weld vertical down.
• Controlled penetration — softer arc minimizes weld spatter and virtually eliminates burn-through on thin metals
• Time saving — vertical down welding increases welding speed by 50%
• Minimum distortion — less heat input reduces the risk of distortion on thin gauge stainless
• Excellent arc stability even on AC
• Superior all-position characteristics
• Designed to weld most 200 and 300 series stainless steels*
• Tensile strength: 82,000 psi/565 Mpa
• Yield strength: 50,000 psi/345 Mpa
• Hardness: 82 Rb
• Elongation: 40%
• Machinability: Excellent
• Heat resistance: Excellent up to 1800°F/982°C
• Corrosion resistance: Excellent
• Color match: Excellent
• Current: DCEP (DC+) or AC
Remove contaminants before welding. Remove defective metal by gouging or grinding. Use short arc length and stringer beads. Minimum amperage recommended. Do not overheat. 300 series stainless can be cooled with wet rags. For welding vertical down, maintain a short arc. Use fast travel speed and maintain a upward angle with the electrode. Remove slag between passes.
Stain-Plus Easy-Down is the first maintenance all-position stainless electrodespecifically formulated to weld vertical down.
• Controlled penetration — softer arc minimizes weld spatter and virtually eliminates burn-through on thin metals
• Time saving — vertical down welding increases welding speed by 50%
• Minimum distortion — less heat input reduces the risk of distortion on thin gauge stainless
• Excellent arc stability even on AC
• Superior all-position characteristics
• Designed to weld most 200 and 300 series stainless steels*
• Tensile strength: 82,000 psi/565 Mpa
• Yield strength: 50,000 psi/345 Mpa
• Hardness: 82 Rb
• Elongation: 40%
• Machinability: Excellent
• Heat resistance: Excellent up to 1800°F/982°C
• Corrosion resistance: Excellent
• Color match: Excellent
• Current: DCEP (DC+) or AC
Remove contaminants before welding. Remove defective metal by gouging or grinding. Use short arc length and stringer beads. Minimum amperage recommended. Do not overheat. 300 series stainless can be cooled with wet rags. For welding vertical down, maintain a short arc. Use fast travel speed and maintain a upward angle with the electrode. Remove slag between passes.