Roughneck™ Wire Mesh Sling, 3' Length
(Pack of
1.0)
Made with high tensile steel mesh and alloy steel end fittings, these slings are widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings.
• Great for use in metalworking shops
• Steel construction resists abrasion and cutting
• Good flexibility and low stretch reduce load damage
• Mesh width helps control and balance loads
• Each sling proof tested and certified
The choker fitting must not be positioned against a load edge or directly on the triangle fitting.
Non-Stock items are made-to-order and are non-returnable.
Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.
Frequently Bought Together
Screw Pin Anchor Shackle, 5/16", 1,500 lb WLL
Couldn't load pickup availability
Wire Rope Sleeve, 3/32", Copper, Zinc Plated
Couldn't load pickup availability
Wire Rope Clip, Malleable, Galvanized, 1/8"
Couldn't load pickup availability
Nylon Cable Tie 15.5" Black
Couldn't load pickup availability
Butt Connector 16 to 14 AWG Blue
Couldn't load pickup availability
Butt Connector 22 to 18 AWG Red
Couldn't load pickup availability
3/8" x 6' Type SGG Gr. 80 Chain Sling
Couldn't load pickup availability
3/8" x 3' Type SOS Gr. 100 Chain Sling
Couldn't load pickup availability
9/32" x 4' Type SSG Gr. 100 Chain Sling
Couldn't load pickup availability
Roughneck™ Wire Mesh Sling, 6' Length
Couldn't load pickup availability
Roughneck™ Wire Mesh Sling, 6' Length
Couldn't load pickup availability
Roughneck™ Wire Mesh Sling, 8' Length
Couldn't load pickup availability
Product Description
Made with high tensile steel mesh and alloy steel end fittings, these slings are widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings.• Great for use in metalworking shops
• Steel construction resists abrasion and cutting
• Good flexibility and low stretch reduce load damage
• Mesh width helps control and balance loads
• Each sling proof tested and certified
The choker fitting must not be positioned against a load edge or directly on the triangle fitting.
Non-Stock items are made-to-order and are non-returnable.
Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.
Technical Specifications
| Item#: | 1417078 |
|---|---|
| Style | Triangle/Choker |
| Type | Type 1 |
| Material | Steel (10 Gauge) |
| Length | 3 ft |
| Width | 2 " |
| Rated Capacity: Vertical | 2,300 lb |
| Rated Capacity: Choker | 2,300 lb |
| Rated Capacity: Basket | 4,600 lb |
| Maximum Temperature | 550 °F |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 0.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
